Editing Setting up multiplayer
From PSP2i Wiki
The edit can be undone. Please check the comparison below to verify that this is what you want to do, and then publish the changes below to finish undoing the edit.
Latest revision | Your text | ||
Line 1: | Line 1: | ||
Instructions can be found below on how to connect online to other players through PPSSPP. Instructions on how to connect online on PSP and PS Vita will not be provided due to issues with cross play, and most of the community plays on PPSSPP. | Instructions can be found below on how to connect online to other players through PPSSPP. Instructions on how to connect online on PSP and PS Vita will not be provided due to issues with cross play, and most of the community plays on PPSSPP. | ||
Line 8: | Line 7: | ||
==Solo multi mode== | ==Solo multi mode== | ||
If playing multi mode alone, no extra setup is required, and can be done without connecting to any outside sources. The below is also applicable if playing multi mode on PPSSPP on the same system, or physically with multiple PSPs or PS Vitas, although someone will have to form party and then join it. | If playing multi mode alone, no extra setup is required, and can be done without connecting to any outside sources. The below is also applicable if playing multi mode on PPSSPP on the same system, or physically with multiple PSPs or PS Vitas, although someone will have to form party and then join it. | ||
===PSP / PS Vita=== | |||
If playing on hardware, make sure that the WLAN switch or internet connectivity is turned on. You will be able to tell if this is the case in the main menu at the bottom, as there is a small banner that signifies the current status of the WLAN switch. | If playing on hardware, make sure that the WLAN switch or internet connectivity is turned on. You will be able to tell if this is the case in the main menu at the bottom, as there is a small banner that signifies the current status of the WLAN switch. | ||
[[File:WLAN on.png|link=]] | [[File:WLAN on.png|link=]] | ||
With this active, go to '''Multi Mode''', choose '''Form Party''', then '''Begin Party Play''', and multi mode will start. | With this active, go to '''Multi Mode''', choose '''Form Party''', then '''Begin Party Play''', and multi mode will start. | ||
===PPSSPP=== | |||
# In PPSSPP, choose '''Settings''' on the home screen → '''Networking'''. | # In PPSSPP, choose '''Settings''' on the home screen → '''Networking'''. | ||
# Change your settings on the page to the following: | # Change your settings on the page to the following: | ||
Line 22: | Line 20: | ||
::: '''Change PRO ad hoc server IP address''': localhost | ::: '''Change PRO ad hoc server IP address''': localhost | ||
You are now all set up to play multi mode alone! | You are now all set up to play multi mode alone! | ||
# In-game, go to '''Multi Mode''', choose '''Form Party''', then '''Begin Party Play''', and multi mode will start. | # In-game, go to '''Multi Mode''', choose '''Form Party''', then '''Begin Party Play''', and multi mode will start. | ||
==PPSSPP multiplayer on the same network== | ==PPSSPP multiplayer on the same network== | ||
If playing multi mode together on the same network, no extra setup is required, and can be done without connecting to any outside sources. | If playing multi mode together on the same network, no extra setup is required, and can be done without connecting to any outside sources. | ||
===All platforms=== | |||
# On the machine that will be hosting, find out its local IP address. | # On the machine that will be hosting, find out its local IP address. | ||
## '''Windows PC''': Open '''cmd.exe''' and type '''ipconfig'''. This will bring up some information, the IPv4 address that starts '''192.168''' or '''10.0''' will be the local IP address. For example: '''192.168.1.15''' | ## '''Windows PC''': Open '''cmd.exe''' and type '''ipconfig'''. This will bring up some information, the IPv4 address that starts '''192.168''' or '''10.0''' will be the local IP address. For example: '''192.168.1.15''' | ||
Line 39: | Line 37: | ||
# In PPSSPP networking settings, all players must set '''Change PRO ad hoc server IP address''' to the local IP address of the host. | # In PPSSPP networking settings, all players must set '''Change PRO ad hoc server IP address''' to the local IP address of the host. | ||
# Restart PPSSPP to make sure the settings change. | # Restart PPSSPP to make sure the settings change. | ||
# In-game, go to '''Multi Mode''' and form/join party as necessary, and you should all be good to go! | # In-game, go to '''Multi Mode''' and form/join party as necessary, and you should all be good to go! | ||
==PPSSPP multiplayer over the internet== | ==PPSSPP multiplayer over the internet== | ||
===ZeroTier One=== | |||
* '''Pros''': Easy and fast installation, works for everybody | |||
* '''Cons''': Requires a very small set up | |||
====Windows PC==== | |||
What you need: | What you need: | ||
* [https://download.zerotier.com/dist/ZeroTier%20One.msi Zero Tier One] ([https://download.zerotier.com/RELEASES/1.6.6/dist/ZeroTier%20One.msi Windows 7 and Windows 8] cannot use the latest version, and must use version 1.6.6) | * [https://download.zerotier.com/dist/ZeroTier%20One.msi Zero Tier One] ([https://download.zerotier.com/RELEASES/1.6.6/dist/ZeroTier%20One.msi Windows 7 and Windows 8] cannot use the latest version, and must use version 1.6.6) | ||
# Install '''Zero Tier One''' on your system. | # Install '''Zero Tier One''' on your system. | ||
# The program will be in the system tray in the bottom right; click it and click '''Join New Network...'''. | # The program will be in the system tray in the bottom right; click it and click '''Join New Network...'''. | ||
# In the window that comes up, paste the string ''' | # In the window that comes up, paste the string '''b6079f73c6cd58c5''' and then click '''Join'''. (If a prompt appears asking if you wish for your PC to discoverable, it is advised to click '''No''') | ||
Now that you are connected to the PSP2i network, you will need to do a one-time setup in PPSSPP: | Now that you are connected to the PSP2i network, you will need to do a one-time setup in PPSSPP: | ||
Line 58: | Line 57: | ||
::: '''Change PRO ad hoc server IP address''': 172.23.1.1 | ::: '''Change PRO ad hoc server IP address''': 172.23.1.1 | ||
::: '''Port offset''': 10000 (this is default) | ::: '''Port offset''': 10000 (this is default) | ||
You are now fully setup to play multiplayer with other players! When going to play with other players, follow the below steps: | You are now fully setup to play multiplayer with other players! When going to play with other players, follow the below steps: | ||
Line 65: | Line 62: | ||
# Make sure that you are connected to ZeroTier One. | # Make sure that you are connected to ZeroTier One. | ||
# In-game, go to '''Multi Mode''' and form/join party as necessary, and you should all be good to go! | # In-game, go to '''Multi Mode''' and form/join party as necessary, and you should all be good to go! | ||
====Android==== | |||
What you need: | What you need: | ||
* [https://download.zerotier.com/dist/ZeroTierOne.apk Zero Tier One] | * [https://download.zerotier.com/dist/ZeroTierOne.apk Zero Tier One] | ||
# Install the '''ZeroTierOne.apk''' on your system. | # Install the '''ZeroTierOne.apk''' on your system. | ||
# Open the app and tap the + icon in the top right. | # Open the app and tap the + icon in the top right. | ||
# In the screen that comes up, enter the string ''' | # In the screen that comes up, enter the string '''b6079f73c6cd58c5''' under '''Network ID''' and tap '''Add Network'''. | ||
# Connect to the network and you should see '''PSP2i''' appear. If you do not, accept any messages, disconnect and then reconnect, and it should appear. | # Connect to the network and you should see '''PSP2i''' appear. If you do not, accept any messages, disconnect and then reconnect, and it should appear. | ||
Line 83: | Line 77: | ||
::: '''Change PRO ad hoc server IP address''': 172.23.1.1 | ::: '''Change PRO ad hoc server IP address''': 172.23.1.1 | ||
::: '''Port offset''': 10000 (this is default) | ::: '''Port offset''': 10000 (this is default) | ||
You are now fully setup to play multiplayer with other players! When going to play with other players, follow the below steps: | You are now fully setup to play multiplayer with other players! When going to play with other players, follow the below steps: | ||
Line 90: | Line 82: | ||
# Make sure that you are connected to ZeroTier One - this is signified by the network being turned on in the app and a key icon at the top of your phone's screen. | # Make sure that you are connected to ZeroTier One - this is signified by the network being turned on in the app and a key icon at the top of your phone's screen. | ||
# In-game, go to '''Multi Mode''' and form/join party as necessary, and you should all be good to go! | # In-game, go to '''Multi Mode''' and form/join party as necessary, and you should all be good to go! | ||
====Steam Deck==== | |||
: '''Because of how SteamOS handles updates, it is possible that ZeroTier One will require a re-installation after one. If this occurs, only step 3 of the installation guide needs to done again unless the script file is deleted.''' | : '''Because of how SteamOS handles updates, it is possible that ZeroTier One will require a re-installation after one. If this occurs, only step 3 of the installation guide needs to done again unless the script file is deleted.''' | ||
Line 111: | Line 100: | ||
::: '''Change PRO ad hoc server IP address''': 172.23.1.1 | ::: '''Change PRO ad hoc server IP address''': 172.23.1.1 | ||
::: '''Port offset''': 10000 (this is default) | ::: '''Port offset''': 10000 (this is default) | ||
You are now fully setup to play multiplayer with other players! When going to play with other players, follow the below steps: | You are now fully setup to play multiplayer with other players! When going to play with other players, follow the below steps: | ||
Line 118: | Line 105: | ||
# Make sure that you are connected to ZeroTier One. You can double check this seeing if your 172.23 address is displayed in PPSSPP under the IP address list. If you are not, re-run the '''PSP2i.sh''' script. | # Make sure that you are connected to ZeroTier One. You can double check this seeing if your 172.23 address is displayed in PPSSPP under the IP address list. If you are not, re-run the '''PSP2i.sh''' script. | ||
# In-game, go to '''Multi Mode''' and form/join party as necessary, and you should all be good to go! | # In-game, go to '''Multi Mode''' and form/join party as necessary, and you should all be good to go! | ||
If you ever wish to disable the ZeroTier One service, use the below commands in '''Konsole''': | If you ever wish to disable the ZeroTier One service, use the below commands in '''Konsole''': | ||
Line 126: | Line 111: | ||
If you ever wish to uninstall ZeroTier One, use the below command in '''Konsole''': | If you ever wish to uninstall ZeroTier One, use the below command in '''Konsole''': | ||
* <code>sudo pacman -Rcns zerotier-one</code> | * <code>sudo pacman -Rcns zerotier-one</code> | ||
===AdhocServer=== | |||
=== | * '''Pros''': Requires no installations, extremely quick set up, works on every system | ||
* '''Cons''': Requires a UPnP enabled router, does not work on mobile data, does not work for most people | |||
====All platforms==== | |||
# In PPSSPP, click '''Settings''' → '''Networking'''. | |||
# Set '''Change PRO ad hoc server IP address''' to '''psp2i.wiki'''. | |||
# Tick '''Enable UPnP (need a few seconds to detect)'''. (only required if hosting) | |||
# Tick '''Enable networking/WLAN'''. | |||
# Set '''Port offset''' to 10000 (this is default).<br><br> | |||
You are now fully setup to play multiplayer with other players. Now go into '''Multi Mode''' and form/join parties as necessary. | |||
''' | |||
== | |||
=== | |||
# In | |||
# | |||
# | |||
# | |||
# | |||
{{Getting Started}} | {{Getting Started}} |