Editing Setting up multiplayer (section)

==PPSSPP multiplayer on the same network==
If playing multi mode together on the same network, no extra setup is required, and can be done without connecting to any outside sources.
{{Spoiler|All platforms|
# On the machine that will be hosting, find out its local IP address.
## '''Windows PC''': Open '''cmd.exe''' and type '''ipconfig'''. This will bring up some information, the IPv4 address that starts '''192.168''' or '''10.0''' will be the local IP address. For example: '''192.168.1.15'''
## '''Android''': This may differ from device to device, but the usual way to find this out is to go to '''Settings''' → '''About device''' → '''Status'''. On this screen, the IP listed under '''local IP address''' is the device's local IP address.
## '''Steam Deck''': In desktop mode, click on the system tray network icon in the bottom right corner of the screen. Then, click on the active connection, click on details, and the address under '''IPv4 Address''' is your local IP address.
# In PPSSPP on all systems, choose '''Settings''' on the home screen → '''Networking'''.
# Change your settings on the page to the following:
::: '''Enable networking/WLAN''': On
::: '''Enable built-in PRO ad hoc server''': On
You are now fully setup to play multiplayer with other players! When going to play with other players, follow the below steps:
# Decide who will host the game.
# In PPSSPP networking settings, all players must set '''Change PRO ad hoc server IP address''' to the local IP address of the host.
# Restart PPSSPP to make sure the settings change.
# In-game, go to '''Multi Mode''' and form/join party as necessary, and you should all be good to go!}}